What stainless steel is
It is steel with at most 1.2% carbon and at least 10.5% chromium12. That chromium forms an oxide layer on the surface, the passive layer, which protects it and keeps it from rusting like ordinary steel. There are five families: austenitic, ferritic, duplex, martensitic and precipitation hardening3. In scrap, these are the ones you will tell apart most often:
| Family | Chemistry | With a magnet |
|---|---|---|
| Austenitic, 300 series (304 and 316) | 304: 17.5 to 19.5% chromium and 8 to 10.5% nickel. 316: 16 to 18% chromium, 10 to 14% nickel and 2 to 3% molybdenum | Barely sticks: a little ferrite makes standard 300 grades slightly magnetic |
| Austenitic, 200 series (201) | 16 to 18% chromium, 3.5 to 5.5% nickel and 5.5 to 7.5% manganese: less nickel than the 300 series | Barely sticks |
| Ferritic, 400 series (430) | Iron and chromium, 14 to 18% chromium in 430, with very little or no nickel | Sticks, like carbon steel |
430 is the most widely used ferritic grade and often replaces 304 indoors: washing machine drums, dishwashers, kitchen utensils2. So the same plant or the same dismantling job can yield stainless from both families.
Stainless scrap grades under ReMA
The ReMA (formerly ISRI) specifications circular is the reference for the international market. Stainless appears in its nickel, stainless and high temperature alloys section, under these names4:
| Grade | ReMA name | What it is |
|---|---|---|
| 18-8 solids (type 304) | Sabot | Clean clips and solids with at least 7% nickel and 16% chromium, and at most 0.50% molybdenum, 0.50% copper, 0.045% phosphorus and 0.03% sulfur |
| 18-8 turnings | Ultra | Clean turnings with at least 7% nickel and 16% chromium, free of nonferrous metals, nonmetallics, excessive iron and oil |
| 200 series solids | Pekoe | Clean 200 series solids with at most 0.5% copper and no foreign attachments |
| Nickel bearing scrap | Saint | Any alloy with at least 3% recovered nickel. Nickel content is determined by recovery, after the buyer evaluates it |
| Shredded, sensor sorted, mostly stainless | Zurik | The number gives the estimated nonferrous content: "Zurik 90" holds about 90%. Free of radioactive material, dross and ash |
316 carries 2 to 3% molybdenum3, above the 0.50% Sabot allows4, and 430 has almost no nickel2. For material like this, description, analysis and preparation are agreed between buyer and seller, as the circular provides for its own stainless grades4.
How to sort your stainless scrap
The magnet
304 and 316 barely stick3; 430 does, like carbon steel2. A magnet separates the series but cannot tell ferritic stainless from ordinary steel.
The analysis
To know the exact grade, and above all its nickel and molybdenum, the chemistry is checked with a spectrometry analyzer.
Solids and turnings apart
Clips and turnings are different grades in the circular: Sabot and Ultra4. Mixed, they are valued as the cheaper one.
316 apart from 304
Its molybdenum takes it out of Sabot43. Kept apart, it is traded on what it contains.
No oil, no other metals
Turnings must arrive free of oil and nonferrous metals, and solids with little copper4. Drain the turnings and remove bolts, bronze and copper.
Never with carbon steel
Under the circular, steel scrap "free of alloys" carries at most 0.45% nickel and 0.20% chromium5. 304 carries at least 8% nickel and 17.5% chromium3: mixed in, its nickel goes unpaid and the steel lot is contaminated.
How stainless scrap is paid per kilo
Nickel moves the price most. worldstainless explains that nickel, a key constituent of the 300 series austenitics, has a volatile price, and that the 400 series ferritics, which do without it, have a more stable price and cost less than their austenitic cousins2. The ReMA circular defines Sabot and Ultra by their minimum nickel and chromium, and Saint is paid on the nickel recovered4.
- Mixed grades. A lot of 304 with 430 or 316 is valued as the lowest grade, or needs piece by piece analysis.
- Oily turnings. Ultra must arrive free of oil4: oil weighs on the scale and is not metal.
- Other metals attached. Bolts, bronze flanges and copper fittings lower the grade: Sabot allows at most 0.50% copper4.
- Unknown grade. If nobody knows what it is, it is analyzed before the offer.
The market range for 304 stainless, with its date and the buyers behind it, is on scrap metal prices; a material only appears there when at least two recent lists back it. How it moved during the month is in the scrap metal market report.
Foreign trade: tariff line 7204.21.01
In the Mexican tariff schedule, stainless scrap is tariff line 7204.21.01: waste and scrap of alloy steel, of stainless steel1.
| Operation | Duty |
|---|---|
| Importing stainless scrap into Mexico (7204.21.01) | Exempt |
| Importing the rest of heading 7204 into Mexico: cast iron, other alloy steel, tinned iron, turnings and clippings, remelting ingots | 35% since 1 January 2026; exempt before6 |
| Exporting any heading 7204 scrap from Mexico | Exempt |
| Entering the United States | Free general rate across heading 72047 |
The decree published on 29 December 2025 raised the import duty on almost all of heading 7204 to 35% and left stainless exempt61. Preferential rates under trade agreements may differ: check your operation with your customs broker. See scrap metal export and import and the regulatory updates.
Invoice, VAT and transport
- It counts as waste for VAT. SAT rules treat all recycled ferrous and nonferrous metal and its alloys as waste (desperdicios), however the invoice describes it and whether it comes in bales, plates or ingot8. If a company buys it from you as an input or to resell it, it withholds 100% of the VAT on your invoice910.
- A CFDI for a real operation. Since 2026, an invoice that does not cover an operation that exists is deemed false11. The scale ticket, the Carta Porte and the photos of each load help show the sale happened.
- Carta Porte in transit. Transport on federal highways carries a CFDI with the Carta Porte complement12.
The rules for each step, with their articles, are on regulation.
Why stainless steel is recycled
Stainless is recycled again and again without losing its strength or its corrosion resistance, and the scrap is valuable enough to be collected and traded without subsidies13.
- 95%of end of life stainless is collected and recycled 13
- 48%recycled scrap goes, on average, into every tonne of new stainless 13
- Over 20years is how long a stainless product stays in use, on average 13
- 90%fewer emissions, at most, when stainless is made from recycled rather than virgin material 13
There is not enough stainless scrap to meet world demand, because much of the stainless ever made is still in use13. The stainless lots Bluegreen buys carry a certificate with a folio number that anyone can verify online. See the recycling certificate and how it is calculated.
How to sell your stainless to Bluegreen
- 01
Post the lot
Photos, the grade if you know it (304, 316, 430, turnings) and a rough weight. If you do not know what it is, photos are enough.
- 02
Get the offer
In under 24 hours, in writing, with the price itemized by grade.
- 03
It is weighed
You are paid the net weight from a certified scale, with a ticket and a photo of every weighing.
- 04
Get paid with your paperwork
By bank transfer after weighing, with CFDI and Carta Porte. Each lot gets its own file and its certificate with a folio number.
The full process is on sell scrap metal, and what happens with carbon steel on steel and scrap.
Frequently asked questions
How much is stainless steel scrap worth per kilo?
It depends on the grade and how clean it is: 304, 316, 430 and turnings are paid differently, and nickel moves the price2. The market range for 304, with its date and sources, is on scrap metal prices.
How do I know if my scrap is 304 or 430 stainless?
With a magnet: 304 barely sticks3 and 430 does2. For the exact grade, with a spectrometry analysis.
What is the difference between 304 and 316 stainless?
316 carries 2 to 3% molybdenum and 10 to 14% nickel; 304 carries 8 to 10.5% nickel and no molybdenum3. They are worth selling apart.
What is Sabot scrap?
It is ReMA's name for clean 18-8 stainless clips and solids, such as 304, with at least 7% nickel and 16% chromium and at most 0.50% molybdenum and copper4.
Can I sell stainless mixed in with steel scrap?
It does not pay. Steel scrap "free of alloys" allows at most 0.45% nickel and 0.20% chromium5, and 304 carries far more3: mixed in, its nickel goes unpaid.
Is there a duty on importing stainless scrap into Mexico?
No. Tariff line 7204.21.01 is exempt, while the rest of heading 7204 pays 35% since 1 January 202616. Treaty rates may differ.
Is VAT withheld when I sell stainless scrap?
If a company buys it from you as an input or to resell it, yes: it withholds 100% of the VAT910. For SAT, metal alloys count as waste too8.
Does Bluegreen issue a certificate for stainless?
Yes. Steel and stainless lots carry a certificate with a folio number that anyone can verify online. See the recycling certificate.
Sources
Every figure on this page comes from a third party publication. Names and logos belong to their owners and only identify the source; they do not imply endorsement.
- Cámara de Diputados, leyes federales vigentesLey de los Impuestos Generales de Importación y de Exportación, Tarifa: capítulo 72, nota 1 e), y partida 7204 (texto vigente, última reforma DOF 29-12-2025) (2025)Open the publication
- worldstainless (International Stainless Steel Forum)Ferritic Stainless Steels, 2.ª edición: Fabulous Ferritics, Five groups of ferritics y Ferritic Characteristics (2025)Open the publication
- International Molybdenum Association (IMOA)Practical Guidelines for the Fabrication of Austenitic Stainless Steels, 2.ª edición, sección 3.1 y tabla 1 (2020)Open the publication
- Recycled Materials Association (ReMA)ReMA's ISRI Specifications Circular, Guidelines for Nonferrous Scrap (NF-2025), Nickel/Stainless/Hi Temp: Pekoe, Sabot, Saint, Ultra y Zurik (2026)Open the publication
- Recycled Materials Association (ReMA)ReMA's ISRI Specifications Circular, Ferrous Scrap Guidelines (FS-2023) (2026)Open the publication
- Diario Oficial de la FederaciónDecreto por el que se reforman diversas fracciones arancelarias de la Tarifa de la Ley de los Impuestos Generales de Importación y de Exportación (DOF 29-12-2025, en vigor el 1 de enero de 2026) (2025)Open the publication
- U.S. International Trade Commission (USITC)Harmonized Tariff Schedule of the United States, Revision 23 (2026), chapter 72, heading 7204 (2026)Open the publication
- Diario Oficial de la FederaciónResolución Miscelánea Fiscal para 2026 (reglas 2.7.3.5, 2.7.7.1.1 a 2.7.7.2.8, 4.1.1 y 4.1.2) (2025)Open the publication
- Cámara de Diputados, leyes federales vigentesLey del Impuesto al Valor Agregado, art. 1o.-A (vigente)Open the publication
- Cámara de Diputados, leyes federales vigentesReglamento de la Ley del IVA, art. 3 (vigente)Open the publication
- Cámara de Diputados, leyes federales vigentesCódigo Fiscal de la Federación, arts. 29-A, fracción IX, 49 Bis y 113 Bis (adicionados o reformados DOF 07-11-2025) (vigente)Open the publication
- Servicio de Administración Tributaria (SAT)Complemento Carta Porte (2026)Open the publication
- worldstainless (International Stainless Steel Forum)Recycling: Today in Use. Tomorrow Recycled. 95% Recovered (2026)Open the publication